warwickts.com

PJP BNC4X10 4mm Banana Jack Attenuator

PJP BNC4X10 4mm Banana Jack Attenuator The 4mm Banana Jack attenuator from PJP allows a degree of safety when connecting traditional oscilloscope probes to circuitry for voltage measurement. They allow for a more secure connection of both the probe and the ground wire into the oscilloscope. The 4mm banana connection allows reliable, safe connections across CAT II, CAT III and CAT IV hazardous low voltages. The attenuator plugs normally via BNC male connector into the scope, and has two 4mm banana socket outputs for the probe and ground lead to plug into to take your measurements. Features Attenuation: x10 Bandwidth: 5MHz Rating: 1000V AC/DC CAT II 600V AC/DC CAT III Maximum Input Voltage: 1400V DC + AC Peak Dimensions: 63mmx19mmx35mm Voltage Coefficient: x10 +/- 5%

PJP BNC4X20 4mm Banana Jack Attenuator

PJP BNC4X10 4mm Banana Jack Attenuator The 4mm Banana Jack attenuator from PJP allows a degree of safety when connecting traditional oscilloscope probes to circuitry for voltage measurement. They allow for a more secure connection of both the probe and the ground wire into the oscilloscope. The 4mm banana connection allows reliable, safe connections across CAT II, CAT III and CAT IV hazardous low voltages. The attenuator plugs normally via BNC male connector into the scope, and has two 4mm banana socket outputs for the probe and ground lead to plug into to take your measurements. Features Attenuation: x20 Bandwidth: 5MHz Rating: 1000V AC/DC CAT II 600V AC/DC CAT III Maximum Input Voltage: 1400V DC + AC Peak Dimensions: 63mmx19mmx35mm Voltage Coefficient: x20 +/- 6%

PJP BNC4X100 4mm Banana Jack Attenuator

PJP BNC4X100 4mm Banana Jack Attenuator The 4mm Banana Jack attenuator from PJP allows a degree of safety when connecting traditional oscilloscope probes to circuitry for voltage measurement. They allow for a more secure connection of both the probe and the ground wire into the oscilloscope. The 4mm banana connection allows reliable, safe connections across CAT II, CAT III and CAT IV hazardous low voltages. The attenuator plugs normally via BNC male connector into the scope, and has two 4mm banana socket outputs for the probe and ground lead to plug into to take your measurements. Features Attenuation: x100 Bandwidth: 5MHz Rating: 1000V AC/DC CAT II 600V AC/DC CAT III Maximum Input Voltage: 500V DC + AC Peak Dimensions: 63mmx19mmx35mm Voltage Coefficient: x100 +/- 6%

PJP ADA205 2 mm Socket to 4 mm Banana Socket

Electro-PJP ADA205 2 mm Socket to 4 mm Banana Socket Designed and manufactured for interconnecting between 2mm and 4mm systems. Voltage Rating of < 33 V AC < 70 V DC This genuine Electro PJP shrouded plug has a 10 A Current Rating.

PJP Ada1056 4 mm Plug to 2 mm Socket Adaptors

Electro-PJP ADA1056 4 mm Plug to 2 mm Socket This test adaptor is designed and manufactured for interconnecting between 2 mm and 4 mm systems. Voltage Rating of < 33 V AC < 70 V DC This genuine Electro PJP product has a 10 A Current Rating.

PJP 404-890 Test Clip Adapter with 4 mm Banana Socket

Electro-PJP 404-890 Test Clip Adapter with 4 mm Banana Socket An insulated sprung hook clip with 4mm banana socket connection at the rear of the probe. Ideal for connection to component leads and IC legs. Specification Voltage Rating of < 33 V AC < 70 V DC Current Rating of 5 A Resistance < 10 Ω With 404-IEC Test Probe

PJP Ada1057 Shrouded to Unshrouded 4mm Adaptors

Electro-PJP ADA1057 4 mm Banana Socket to 4 mm Banana Plug The test adaptor is designed and manufactured for interconnecting between 4mm systems. This specific shrouded to unshrouded adaptor enables standard 4mm test leads to be connected to any breakout box with unshrouded 4 mm sockets. This adapter is commonly used for vehicle electric testing and diagnosis. Voltage Rating of < 33 V AC < 70 V DC 10 A Current Rating.

PJP Ada35/NEEDLE0.6-BC Long and Flexible Needle Adapter

Electro-PJP Ada35NEEDLE0.6-BC Long and Flexible Needle Adapter Voltage Rating of < 33 V AC < 70 V DC Current Rating of 1 A Resistance < 0.8 Ω Needle 0.6 mm diameter (0.024in) x 19 mm length (0.750in).

PJP ADA204 2mm Plug to 4mm Banana Jack Adaptor

Electro-PJP ADA204 2mm Banana Plug to 4mm Socket Adaptor The Electro PJP ADA204 is a 2mm plug to 4mm banana jack adaptor. This adaptor is designed and manufactured for interconnecting between 2mm and 4mm systems, typically used with some third party breakout boxes in Automotive diagnostics. This genuine Electro PJP shrouded plug has a 36 A Current Rating. View the Datasheet for more information.

PJP MgP6.0-IEC 1500V Right Angle 6.0mm Magnetic 4mm Socket Adapter

Electro-PJP MgP6.0-IEC 1500V Right Angle 6.0mm Magnetic 4mm Socket Adapter The MgP6.0-IEC Right Angle Magnetic 4mm Socket Adapter has a 6.0mm Magnetic Tip with a 4mm socket. With a voltage rating of 1500V CAT III these adapters are ideal for conducting safe measurements on solar photovoltaic installations and Electric Vehicles (EV). Voltage Rating of 1500V CAT III, 1000V CAT IV 4A Current Rating Insulation Material: PP Metallic material: Ni coated brass Magnet: N35

PJP MgP6.6-IEC 1500V Right Angle 6.6mm Magnetic 4mm Socket Adapter

Electro-PJP MgP6.6-IEC 1500V Right Angle 6.6mm Magnetic 4mm Socket Adapter The MgP6.6-IEC Right Angle Magnetic 4mm Socket Adapter has a 6.6mm Magnetic Tip with a 4mm socket. With a voltage rating of 1500V CAT III these adapters are ideal for conducting safe measurements on solar photovoltaic installations and Electric Vehicles (EV). Voltage Rating of 1500V CAT III, 1000V CAT IV 4A Current Rating Insulation Material: PP Metallic material: Ni coated brass Magnet: N35

PJP MgP10_0-IEC 1500V Right Angle 10mm Magnetic 4mm Socket Adapter

Electro-PJP MgP10_0-IEC 1500V Right Angle 10mm Magnetic 4mm Socket Adapter The MgP10_0-IEC Right Angle Magnetic 4mm Socket Adapter has a 10mm Magnetic Tip with a 4mm socket. With a voltage rating of 1500V CAT III these adapters are ideal for conducting safe measurements on solar installations. Voltage Rating of 1500V CAT III, 1000V CAT IV 4A Current Rating Insulation Material: PP Metallic material: Ni coated brass Magnet: N35

PJP MgP8-IEC 1500V Right Angle 8mm Magnetic 4mm Socket Adapter

Electro-PJP MgP8-IEC 1500V Right Angle 8mm Magnetic 4mm Socket Adapter The MgP10-IEC Right Angle Magnetic 4mm Socket Adapter has a 8mm Magnetic Tip with a 4mm socket. With a voltage rating of 1500V CAT III these adapters are ideal for conducting safe measurements on solar installations. Voltage Rating of 1500V CAT III, 1000V CAT IV 4A Current Rating Insulation Material: PP Metallic material: Ni coated brass Magnet: N35

PJP MgP11-IEC 1500V Right Angle 11mm Magnetic 4mm Socket Adapter

Electro-PJP MgP11-IEC 1500V Right Angle 11mm Magnetic 4mm Socket Adapter The MgP11-IEC Right Angle Magnetic 4mm Socket Adapter has a 11mm Magnetic Tip with a 4mm socket. With a voltage rating of 1500V CAT III these adapters are ideal for conducting safe measurements on solar installations. Voltage Rating of 1500V CAT III, 1000V CAT IV 4A Current Rating Insulation Material: PP Metallic material: Ni coated brass Magnet: N35

PJP AdaBV140 Screw Terminal Flexible Test Point

Electro-PJP AdaBV140 Screw Terminal Flexible Test Point Available Jun 2024 The AdaBV140 Screw Terminal Test Adapter is manufactured with 2.50mm2 solid copper core (1.7mm o/d) and features a shrouded 4mm banana socket to enable the safe connection of test and measurement equipment. The test adapter is designed to be inserted and screwed into a terminal block and remains flexible to enable technicians to conduct electrical tests in the most cramped and inaccessible conditions. Once connected the protective finger guard allows technicians to make and disconnect connections with live voltage. The adapter can be inserted into the terminal as a temporarily for immediate testing or left in place for months/ years for infrequent tests. Safety Rating IEC 61010-031 CAT II 1000V/ CAT III 1000V/ CAT IV 600V 36A Current Rating Available in multiple colours.

PJP AdaMAGNET-D7-F4 Straight Magnetic Adapter

Electro-PJP AdaMAGNET-D7-F4 7mm Straight Magnetic Adapter The AdaMAGNET-D7-F4 Test Adapter is manufactured with Ni Coated Brass contacts and features a 4mm socket. Voltage Rating of < 33 V AC < 60 V DC 12 A Current Rating

PJP 606-MG6.6-IEC3IV Right Angle Magnetic Adapter

Electro-PJP 606-MG6.6-IEC3IV Right Angle Magnetic Adapter - 6.6mm Dia The 606-MG6.6-IEC3IV has a 6.6mm Right-angle Magnetic Adapter with a 4mm socket. Voltage Rating of 1000V CAT III and 600V CAT IV 4A Current Rating Discontinued - Last Stock Replaced with MpG6.6-IEC 6.6mm Magnetic Adapter

PJP Ada32-1.4 Test Point Smooth Pin 13mm

Electro-PJP Ada32-1.4 Test Point Smooth Pin 13mm The Ada32-1.4 Test Adapter has a 13mm pin and a 4mm socket. The contact parts are Ni coated brass. Voltage Rating of < 33 V AC < 60 V DC 36 A Current Rating.

Pomona 6754 BNC (F/M/F) In-Line Adapter 75 Ohm

Pomona 6754 BNC (F/M/F) In-Line Adapter The Pomona 6754 is a BNC (Female/Male/Female) In-Line Adapter with an impedance of 75 Ω. Commonly used for broadcast applications.Voltage: 500 VrmsOperating Temperature: -85 °F to +329 °F (-65 °C to +165 °C) Max.

Pomona 6728 Banana Jack to Non-Sheath Banana Plug Adapter

Pomona 6728 Banana Jack to Non-Sheath Banana Plug Adapter The 6728 Adapter provides an easy and quick conversion from a standard sheathed banana plug / patch cord to a standard exposed banana plug. It allows standard sheathed banana plugs / patch cords to connect to non-sheath style banana jacks or blinding post. The Pomona 6728 is ideal for environments using a mixture of sheathed and non-sheathed style patch cords.Voltage: 600 Vrms; For CE compliance: not intended for hand held use at voltage above 33 Vrms / 70 Vdc.Current: 20 A maxTemperature: -10 to +55 C

Pomona 6700 BNC (Male) to Dual BNC (Female) Straight Adapter

Pomona 6700 BNC (Male) to Dual BNC (Female) Straight Adapter 6700 features a modified “T" adapter that helps maximize space by allowing BNC cables to connect straight into the body. Ideal for cross-connect panels requiring multiple BNC connections. The Adapter is precision machined (not die-cast) from brass.Impedance: 50 OhmsFrequency: 0 to 4 GHz 500 V Hands free testing in controlled voltage environment: For CE compliance: not intended for hand helduse at voltages above 33 Vrms / 70 Vdc.View the Datasheet for the complete technical specification.

Pomona 5319 BNC Female To Phono Plug Adapter

Pomona 5319 BNC (F) to Phono Plug The Pomona 5319 BNC Female to Phono Plug Adapter permits standard BNC cables (male ends) to be used with equipment having phono jacks. Gold plated center contact for minimum contact resistance and superior signal transfer. Machined (not die-cast) components for long life. Temperature: +102ºC. (216ºF.) Max.Voltage: Hands free testing in controlled voltage environments: 500 Vrms Max. For CE compliance: not intended for hand-held use at voltage above 33 Vrms/70 Vdc. View the Datasheet for further technical details.

WTS-BNC-F-4S BNC Female Connector to 4mm Shrouded Socket

WTS-BNC-F-4S BNC Female Connector to 4mm Shrouded Socket Features Tarnish resistant plated brass body female BNC connector Silver plated beryllium copper center contact Connector is housed in a molded nylon handle Wire 20 AWG 105 x 40 tinned copper PVC insulation 0.080" O.D. PJP 1063 4mm Shrouded Sockets

WTS-BNC-F-4SP BNC Female Connector to 4mm Stacking Plugs

WTS-BNC-F-4SP BNC Female Connector to 4mm Shrouded Stacking Plugs Features Tarnish resistant plated brass body female BNC connector Silver plated beryllium copper center contact Connector is housed in a molded nylon handle Wire 20 AWG 105 x 40 tinned copper PVC insulation 0.080" O.D. PJP 1066 4mm Shrouded Stacking Banana Plugs.

Pomona 4391-75 BNC Resistor Attenuator 75 Ohm

Pomona 4391-75 BNC Resistor Attenuator - 75 Ohm The Pomona 4391-75 BNC Resistor Attenuator is designed and manufactured to add series resistance to coaxial lines with BNC connectors. Resistance Value of 75 Ohm. Operating Temperature: +102° C (+216° F) Max.Frequency Range: DC to 500 MHzResistance Tolerance +1%Power: 2W @ 25° C. Max View the Datasheet for more information.

Pomona 3534 BNC (Female-Male) Right Angle Test Adapter

Pomona 3534 BNC (Female-Male) Right Angle Test Adapter Adapter Coaxial Connector BNC Plug, Male Pin To BNC Jack, Female Socket 50 Ohm. Operating Voltage: Shield/Earth: 30VAC/60VDC Max. Inner Conductor/Shield: 500VRMS Max.Operating Temperature: -65ºC to +165ºCNominal Impedance: 50 OhmsView the Datasheet for the Technical Specification

Pomona 3286 BNC (Female) To UHF (Male) Test Adapter

Pomona 3286 BNC (Female) To UHF (Male) Test Adapter Adapter Coaxial Connector UHF Plug, Male Pin To BNC Jack, Female Socket 50 Ohm. Operating Voltage: Shield/Earth: 30VAC/60VDC Max. Inner Conductor/Shield: 500VRMS Max.Operating Temperature: -55ºC to +85ºCNominal Impedance: 50 Ohms View the Datasheet for the complete Technical Specification.

Pomona 3287 BNC (Male) To UHF (Female) Test Adapter

Pomona 3287 (Male) To UHF (Female) Test Adapter Adapter Coaxial Connector BNC Plug, Male Pin To UHF Jack, Female Socket Non-Constant. Operating Voltage: Shield/Earth: 30VAC/60VDC Max. Inner Conductor/Shield: 500VRMS Max.Operating Temperature: -55ºC to +85ºC (-67°F) (+185°F)Nominal Impedance: Non-Constant Impedance. View the Datasheet for the complete Technical Specification.

Pomona 3284 BNC RF Tee Adapter

Pomona 3284 BNC - Coaxial (F) to (F) Adapter Coaxial Connector BNC Jack, Female Socket To BNC Jack, Female Socket (2) 50 Ohm. Operating Voltage: Shield/Earth: 30VAC/60VDC Max. Inner Conductor/Shield: 500VRMS Max.Operating Temperature: -65ºC to +165ºCNominal Impedance: 50 OhmsView the Datasheet for the Technical Specification.

Pomona 3580 Triaxial Bulkhead (Female)

Pomona 3580 Triaxial Bulkhead (F) Bulkhead panel mount Coaxial Connector BNC Jack, Female Socket To Solder Cup, Female Socket 50 Ohm. Operating Temperature: -65°C. (85°F.) to +165° C. (+329°F.) Dielectric: PTFE Nominal Impedance: 50 Ohms View the Datasheet for the Technical Specification.

PJP 3310-IEC Insulated D4 Banana Plug Adapter

Electro PJP 3310-IEC insulated Female/Female extension adapter for D4 banana plug - IEC 1000V. 4 mm Banana Socket to 4 mm Banana Socket, Operating Voltage of 1000V CAT III < 5 M Ohm Current rating of 36 A. View the Datasheet for more information.

PJP 5704-Sd 4mm Fused Male-Female Extension Adapter

Electro PJP 5704-Sd 4mm Fused Male-Female Extension Adapter 4mm Banana Plug to 4mm Banana Jack Sd Class Fused Extension Adapter. Operating Voltage of 500V AC CAT III Ni Coated Brass Contact Parts Sd Fuse NOT included.

PJP Ada3032 4 mm Banana Jack to 4 mm Spade Lug Adapter

Electro PJP Ada3032 4 mm Banana Jack to 4 mm Spade Lug Adapter Insulated adapter featuring a terraced spade and d4 female connector. Available in a range of colours. Operating Voltage of < 33 V AC < 70 V DC Current rating of 36 A.

PJP Ada3034 4 mm Banana Jack to 6.3 mm Spade Lug Adapter

Electro PJP Ada3034 4 mm Banana Jack to 6.3 mm Spade Lug Adapter Insulated adapter featuring a terraced spade and d4 female connector. Available in a range of colours. Operating Voltage of < 33 V AC < 70 V DC Current rating of 36 A.

Pomona 2138 Standard Banana Jack to Miniature Banana Plug

Pomona 2138 Banana Jack to Miniature Banana Plug Use to mate standard (4.22mm) diameter banana plug to equipment having miniature banana jacks. The Banana jack to miniature plug adapter Operating Voltage of 2500 VDC and a Current rating of 5A. The Banana jack to miniature plug adapter comes in a pack of 10Please view the Datasheet for the products full specification.

PJP 3380-IECIV 4 mm Socket to 4 mm Socket Adapter

Electro PJP 3380-IECIV 4 mm Banana (female) Jack to 4 mm Banana (female) Jack Adapter. 4 mm Banana Socket to 4 mm Banana Socket, Operating Voltage of 1000V CAT IV Current rating of 10 A. View the Datasheet for more information.

PJP 5701-Sd-10A Fused Female-Female Adapter

Electro PJP 5701-Sd-10A 4mm Fused Female-Female Extension Adapter 4mm Banana Jack to 4mm Banana Jack Fused Adapter. Operating Voltage of 500V AC CAT III Ni Coated Brass Contact Parts 10 A Fuse included.

WTS-4TB-001 Threaded 4mm Banana Plug Adapter

Threaded 4mm Banana Plug Adapter for Test Lights & Probes A bespoke 4mm Banana plug adapter with an 8-32 UNC threaded socket at the rear. Designed to accept the threaded probe of: OTC 3633 Mini-Coil Cord Circuit Tester automotive test light; OEMTOOLS 25936 Mini Circuit Tester automotive test light. ACTRON CP7841 MINI COIL CORDED CIRCUIT TESTER automotive test light; Or any 8-32 threaded test probes such as Amprobe TL36A. Voltage rating < 30V AC - 70V DC Current rating of 36 A. Note that there may be a lead time on this product as they are manufactured to order.

Pomona 1809 4 mm Banana Jack to 2mm Pin Tip Adapter

Pomona 1809 4mm Banana Jack to 2mm Pin Tip Adapter The Pomona 1809 adapter accepts a 0.08" (2.03mm) pin tip plug or probe tip and fits a standard 4mm diameter banana jack. The Banana jack to Pin Tip adapter has an Operating Voltage of 2500 WVDC and a Current rating of 5A. Please view the Datasheet for the products full specification.

Pomona 1432 2 mm Banana Jack to Pin Tip Plug

Pomona 1432 Banana Jack to Pin Plug Adapter The Pomona 1432 is used to mate a standard 2mm banana plug patch cord to equipment having pin jacks. This is a genuine Pomona part and has a Current rating of 5A. Please view the datasheet for full specification.

ADAMagnet-D10-F4 4 mm Socket 10 mm Magnet Adapter

Electro PJP ADAMagnet-D10-F4 4 mm Socket 10 mm Magnet Adapter 4 mm Banana (Female) Jack Socket to 10 mm (0.393 '') diameter Magnet Adapter. I Max - 12A Available in 6 colours. Genuine Electro-PJP product.

ADAMagnet-D9-F4 4 mm Socket 9 mm Magnet Adapter

Electro PJP ADAMagnet-D9-F4 4 mm Socket 9 mm Magnet Adapter 4 mm Banana (Female) Jack Socket to 9 mm (0.354 '') diameter Magnet Adapter. I Max - 12A Available in 6 colours. Genuine Electro-PJP product.

Fluke 80AK-A Thermocouple Adapter

Fluke 80AK-A Thermocouple Adapter Adapts Type-K thermocouple mini-connector to dual banana plug inputs. Measurement range and accuracy: probe dependent. Suitable for low-voltage applications (below 30V AC, 60V DC).

Pomona 5748 Universal RF Adapter Kit

Pomona 5748 Universal RF Adapter Kit Maxi Universal RF Adapter Kit - contains a complete range of intermediate couplers and adapters housed in a durable case, see data sheet for a full component list.

Pomona 5698 Universal Adapter Kit

Pomona 5698 Universal Adapter Kit The Universal Adapter Kit contains: BNC(m), BNC(F), TNC(m), TNC(f), SMA(m), SMA(f), N(m), four intermediate couplers and one Double Banana Jack. The Test Adapters are all housed in a molded case.

PJP 7047-IEC BNC Socket to 4mm Banana Socket Adapter

Electro-PJP 7047-IEC Female BNC to 4mm Banana Sockets Ideal for making connections between breakout leads or current (Amp) clamps with male 4mm plugs and automotive oscilloscopes from Hantek, Picoscope and TiePie etc. Perfect for mating with TCA 600 Current Clamp for first look automotive diagnostics. Female BNC to two 4mm Female Banana Jacks (Sockets) Adapter. The BNC plug is fully insulated and the banana sockets are coloured Red and Black for easy identification. IEC 61010 500 V CAT I / 150 V CAT III, reinforced insulation, pollution degree 2, 3 A. CE Approved Max 3A

PJP 21130 BNC (F) to 4mm Shrouded Banana Plugs Adapter

Electro-PJP 21130 BNC (F) to 4mm Shrouded Banana Plugs Adapter Ideal for converting a BNC connection to standard 4mm banana socket connections. Useful for connection to instruments or multimeters to oscilloscopes and vice versa. Female BNC to two 4mm Female Banana Plugs Adapter. The BNC female socket is fully insulated and the banana plugs are fully shrouded and coloured Red and Black for easy identification. Rating: IEC 61010 600V CAT III, 1000V CAT II, reinforced insulation, Pollution degree 2, 3 A. CE Approved Max 3A

PJP 7043-IEC BNC Plug to 4mm Adapter

Electro-PJP 7043-IEC Male BNC to 4mm Banana Sockets Ideal for making connections between breakout leads or current (Amp) clamps with male 4mm plugs and automotive oscilloscopes from Hantek, Picoscope and TiePie etc. Perfect for mating with TCA 600 Current Clamp and TCA 60 Current Clamp for first look automotive diagnostics. Male BNC to two 4mm Female Banana Jacks (Sockets) Adapter. The BNC plug is fully insulated and the banana sockets are coloured Red and Black for easy identification.The 4mm sockets and BNC plug are fully shrouded for safety. IEC 61010 500 V CAT I / 150 V CAT III, reinforced insulation, pollution degree 2, 3 A. CE Approved Max 3A View the Datasheet for more information.