Hand Crimping tools

Hand Crimping Tools

We have a wide selection of hand crimping tools in various designs and sizes tailored to provide secure and precise connections. Having this variety of tools is essential in manufacturing as it helps meet our customers needs and fulfils specific requirements at a high quality.

Examples of crimps

Technical Data

Wire length, processing on both sides min:	1 mm
Wire length max:	800000 mm
Strip lengths, full stripping side 1 max:	115 mm
Strip lengths, full stripping side 2 max:	40 mm
Strip lengths, partial stripping/multiple stripping max:	999.9 mm
Wire outer diameter max:	10 mm
Flat cable width max:	12 mm
Automatic conductor detector:	no
Wire cross section min:	0.05 mm²
Wire cross section max:	10 mm²
Pieces max:	99999
Wire draw-in speed max:	4 m/s
Sequence processing (number of wires):	with TopWin
Length accuracy:	Repetition accuracy: ± (0.2% + 1.0)
Drive system:	Single rollers
Wire guide, side 1:	Swivel guide
Wire guide, side 2:	Fixed guide
Noise level:	< 80 dB
Wire protection/ground:	2 x 5 × 20 mm 6.3 A
Nominal output (average):	135 VA
Compressed-air connection:	5 – 8 bar
Operating pressure:	6 bar
Weight:	46 kg
Dimensions/length:	465 mm
Dimensions/width:	460 mm
Dimensions/height:	385 mm
Installation location:	Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min:	630 x 690 mm
Load capacity of production table min:	75 kg
Humidity, non-condensing:	90 %
Temperature operation:	10 – 40 °C
Processing outside the specifications:	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Hard, tough wires:	In the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, Komax will be happy to provide processing samples of your wires.

Hand Crimping tools

Hand Crimping Tools

Examples of crimps

Request A Quote